Loading prices...

Register/Sign in
oilmonster
Ev

Evans Energy II,LLC
2300 Hwy 11 North , Laurel, Mississippi, United States

Memberships : NA
Industry : Renewable Energy
Basic Member
Since Mar, 2019
About Company

Evans Energy II,LLC is an independent energy exploration, operating, and drilling group specializing in oil and natural gas exploration, development and production. With over 30 years of experience, the Evans family has been involved in almost every aspect of the oil and gas industry. As an owner/operator of each project, Evans Energy II,LLC and Mustang Drilling oversee all phases from developing future prospects, obtaining oil, gas and mineral leases, drilling, completion, operation and production.  Our motto, "Success built on Experience," is more than just a tagline; it is our mission. We continually strive to secure valuable leases with proven reserves along the Gulf Coast states to develop new fields as well as revisiting previously drilled areas to increase the recovery of oil and gas reserves by utilizing advanced completion technologies.  When you partner with Evans Energy II,LLC, you are partnering with a company and professionals whose primary goal is to find production with every well that we drill. When evaluating potential prospects, our geologists and engineers extract every bit of data available in order to form the most educated decision possible concerning a wells potential. Seismic, field mapping, subsurface and structure mapping, known production proximity, historical production, new zone potential and new prospecting technology are all utilized.

Our History 

With over 30 years of experience, the Evans family has been directly involved in almost every aspect of the oil and gas industry. As an owner/operator, Evans Energy II,LLC is able to oversee every phase of a project from developing prospects, obtaining leases, drilling, completion, production and daily operations.   Our motto, "Success built on Experience," is more than just a tagline; it is our mission. We continually strive to secure valuable leases with proven reserves along the Gulf Coast and mid Continent area to develop new fields as well as revisiting previously drilled areas to increase the recovery of oil and gas reserves by utilizing advanced drilling and completion technologies.  When you partner with Evans Energy II,LLC you are partnering with a company and professionals whose primary goal is to find production with every well that we drill. When evaluating potential prospects, our geologists and engineers extract every bit of data available in order to form the most educated decision possible concerning a wells potential. Seismic, field mapping, subsurface and structure mapping, known production proximity, historical production, new zone potential and new prospecting technology are all utilized.  The projects offered by Evans Energy II,LLC are typically part of a bigger field development involving both previous and future drilling of wells in a prospective area. This allows us to synergize our geological and engineering research, as well as reduce the overall costs associated in developing the infrastructure required with drilling each well. Multiple well development further reduces cost by more efficient use of personnel, equipment, and infrastructure across a number of wells to significantly reduce the cost per well. Evans Energy II,LLC is always a large working-interest partner in every project we put together. By Evans Energy II,LLC being a large working-interest partner, we share a common interest with our partners: to produce the best possible results at the lowest possible cost. When you are successful, we are successful.

Our Mission

  • Evans Philosophy: Evans Energy II,LLC was founded on the back of hard work and "Do what you say youre going to do" attitude. Today, Evans Energy II,LLC is the result of that development of work, pride and fair play.

  • Evans Goals: Evans Energy II,LLC believes that success is a team effort and is always focused on the prize of a successful well and a financially successful operation for everyone involved. With over 30 years of experience and 400 successful wells drilled throughout Texas, Louisiana, Mississippi, Alabama and several other states, the Evans management team has succeeded in establishing processes that are proven and profitable. Our goal is to continue to leverage past success and experience in order to develop new opportunities in all areas of the companys services which include exploration and contract drilling. With our teams ingenuity and the advantage of new technological innovations, we are developing maximum leverage for the recovery of domestic oil and gas reserves.

  • Evans Strategy: By utilizing our years of drilling and operating experience and working closely with experienced geologists and engineers, we are able to extract every bit of date available in order to form the most educated decision possible concerning a wells potential and select only the prospects with the most potential for commercial success. Some of the methods that we utilize are 3D seismic, field mapping, known production proximity, historical production, new zone potential and new prospecting technology.

Company Management:

When evaluating an oil and gas drilling project, you must first look first at the company to identify how long they have been in the oil business and in what capacities. Second, you need to find out who the operator is on the wells and look at what their success has been in the past. You should also make sure there is a experienced geologist involved, who will look at the geology and related data on a project and give their evaluation of its likeliness for success. This criterion will help keep you out of projects with people who are inexperienced and less likely to manage the project properly.

Drilling:

The well is created by drilling a hole 5 to 50 inches (127.0 mm to 914.4 mm) in diameter into the earth with a drilling rig that rotates a drill string with a bit attached. After the hole is drilled, sections of steel pipe (casing), slightly smaller in diameter than the borehole, are placed in the hole. Cement may be placed between the outside of the casing and the borehole. The casing provides structural integrity to the newly drilled wellbore, in addition to isolating potentially dangerous high pressure zones from each other and from the surface.   With these zones safely isolated and the formation protected by the casing, the well can be drilled deeper (into potentially more-unstable and violent formations) with a smaller bit, and also cased with a smaller size casing. Modern wells often have two to five sets of subsequently smaller hole sizes drilled inside one another, each cemented with casing. 

Completion:

After drilling and casing the well, it must be completed. Completion is the process in which the well is enabled to produce oil or gas. In a cased-hole completion, small holes called perforations are made in the portion of the casing which passed through the production zone, to provide a path for the oil to flow from the surrounding rock into the production tubing. In open hole completion, often sand screens or a gravel pack is installed in the last drilled, uncased reservoir section. These maintain structural integrity of the wellbore in the absence of casing, while still allowing flow from the reservoir into the wellbore. Screens also control the migration of formation sands into production tubulars and surface equipment, which can cause washouts and other problems, particularly from unconsolidated sand formations of offshore fields.   After a flow path is made, acids and fracturing fluids may be pumped into the well to fracture, clean, or otherwise prepare and stimulate the reservoir rock to optimally produce hydrocarbons into the wellbore. Finally, the area above the reservoir section of the well is packed off inside the casing, and connected to the surface via a smaller diameter pipe called tubing. This arrangement provides a redundant barrier to leaks of hydrocarbons as well as allowing damaged sections to be replaced. Also, the smaller cross-sectional area of the tubing produces reservoir fluids at an increased velocity in order to minimize liquid fallback that would create additional back pressure, and shields the casing from corrosive well fluids.   In many wells, the natural pressure of the subsurface reservoir is high enough for the oil or gas to flow to the surface. However, this is not always the case, especially in depleted fields where the pressures have been lowered by other producing wells, or in low permeability oil reservoirs. Installing a smaller diameter tubing may be enough to help the production, but artificial lift methods may also be needed. Common solutions include downhole pumps, gas lift, or surface pump jacks. Many new systems in the last ten years have been introduced for well completion. Multiple packer systems with frac ports or port collars in an all in one system have cut completion costs and improved production, especially in the case of horizontal wells. These new systems allow casings to run into the lateral zone with proper packer/frac port placement for optimal hydrocarbon recovery. 

Production:

The production stage is the most important stage of a wells life, when the oil and gas are produced. By this time, the oil rigs and workover rigs used to drill and complete the well have moved off the wellbore, and the top is usually outfitted with a collection of valves called a Christmas tree or Production trees. These valves regulate pressures, control flows, and allow access to the wellbore in case further completion work is needed. From the outlet valve of the production tree, the flow can be connected to a distribution network of pipelines and tanks to supply the product to refineries, natural gas compressor stations, or oil export terminals.   As long as the pressure in the reservoir remains high enough, the production tree is all that is required to produce the well. If the pressure depletes and it is considered economically viable, an artificial lift method mentioned in the completions section can be employed.   Workovers are often necessary in older wells, which may need smaller diameter tubing, scale or paraffin removal, acid matrix jobs, or completing new zones of interest in a shallower reservoir. Such remedial work can be performed using workover rigs – also known as pulling units, completion rigs or "service rigs" – to pull and replace tubing, or by the use of well intervention techniques utilizing coiled tubing. Depending on the type of lift system and wellhead a rod rig or flushby can be used to change a pump without pulling the tubing.   Enhanced recovery methods such as water flooding, steam flooding, or CO2 flooding may be used to increase reservoir pressure and provide a "sweep" effect to push hydrocarbons out of the reservoir. Such methods require the use of injection wells (often chosen from old production wells in a carefully determined pattern), and are used when facing problems with reservoir pressure depletion, high oil viscosity, or can even be employed early in a fields life. In certain cases – depending on the reservoirs geomechanics – reservoir engineers may determine that ultimate recoverable oil may be increased by applying a waterflooding strategy early in the fields development rather than later. Such enhanced recovery techniques are often called "tertiary recovery".

Company NameEvans Energy II,LLC
Business CategoryRenewable Energy
Address2300 Hwy 11 North
Laurel
Mississippi
United States
ZIP: 39440
PresidentPamela H. Evans
Year EstablishedNA
EmployeesNA
MembershipsNA
Hours of OperationNA
Company Services
  • Drilling
  • Operations
  • Exploration
  • Development
Phone NumberLocked contentSubscribe to view
Fax NumberLocked content
EmailLocked content
WebsiteLocked content
NamePositionContact DetailsSubscribe to view
***PresidentLocked content
***Jr., Lead ConsultantLocked content
***General ManagerLocked content
Company Review
Start your review of Evans Energy II,LLC

Renewable Energy Companies

Companies in United States

View Company Location Map

Contact Company

By continuing you agree to the Terms & Conditions and Privacy Policy of this website

×

Quick Search

Advanced Search