Geo-Heat Center
3201 Campus Drive, Klamath Falls, Oregon, United States

The transfer of technological information to consultants, developers, potential users, and the general public is an important element in the development of direct heat utilization of geothermal energy. The Geo-Heat Center's resources are available to the public, through United States Department of Energy (USDOE) grants. Information developed through firsthand experience with hundreds of projects and through extensive research is provided to individuals, organizations or companies involved in geothermal development.

What is Geothermal?

Geothermal Energy is heat (thermal) derived from the earth (geo). It is the thermal energy contained in the rock and fluid (that fills the fractures and pores within the rock) in the earth's crust.

Calculations show that the earth, originating from a completely molten state, would have cooled and become completely solid many thousands of years ago without an energy input in addition to that of the sun. It is believed that the ultimate source of geothermal energy is radioactive decay occurring deep within the earth (Burkland, 1973).

In most areas, this heat reaches the surface in a very diffuse state. However, due to a variety of geological processes, some areas, including substantial portions of many western states, are underlain by relatively shallow geothermal resources.

These resources can be classified as low temperature (less than 90°C or 194°F), moderate temperature (90°C - 150°C or 194 - 302°F), and high temperature (greater than 150°C or 302°F). The uses to which these resources are applied are also influenced by temperature. The highest temperature resources are generally used only for electric power generation. Current U.S. geothermal electric power generation totals approximately 2200 MW or about the same as four large nuclear power plants. Uses for low and moderate temperature resources can be divided into two categories: direct use and ground-source heat pumps.

Direct use, as the name implies, involves using the heat in the water directly (without a heat pump or power plant) for such things as heating of buildings, industrial processes, greenhouses, aquaculture (growing of fish) and resorts. Direct use projects generally use resource temperatures between 38°C (100°F) to 149°C (300°F). Current U.S. installed capacity of direct use systems totals 470 MW or enough to heat 40,000 average-sized houses.

Ground-source heat pumps use the earth or groundwater as a heat source in winter and a heat sink in summer. Using resource temperatures of 4°C (40°F) to 38°C (100°F), the heat pump, a device which moves heat from one place to another, transfers heat from the soil to the house in winter and from the house to the soil in summer. Accurate data is not available on the current number of these systems; however, the rate of installation is thought to be between 10,000 and 40,000 per year.

The current production of geothermal energy from all uses places third among renewables, following hydroelectricity and biomass, and ahead of solar and wind. Despite these impressive statistics, the current level of geothermal use pales in comparison to its potential. The key to wider geothermal use is greater public awareness and technical support—two areas in which the Geo-Heat Center is very active.